zmxx12@yeah.net
https://manufacturer-information.blogspot.com
https://manufactureequipment.blogspot.com
Rebar Tying Machine, Rebar Tier, automatic rebar tying machine
Introduction of Battery Powered Automatic Max Rebar Tier
WL type Battery Powered Automatic Max Rebar Tier is hand-held intellective battery dynamoelectric device,it possesses the trait of secure and credible, reasonable ,advance d cratt,easily manipulate,high work efficiency.It can use
in the architecture engineering to pack precast Rebars.It can highly raise the speed of
engineer.
Parameter of Battery Powered Automatic Max Rebar Tier
Model | WL-210 | WL-400 | WL-500 |
Max Tying Diameter | 21mm | 40mm | 50mm |
Time of Making a Knot | 0.8 s | 0.8 s | 0.8s |
Battery Type | 9.6V Ni-MH 3000mAh | 9.6V Ni-MH 3000mAh | 9.6V Ni-MH 3000mAh |
Charge time | 1 hour quick charger | 1 hour quick charger | 1 hour quick charger |
GW of Machine | 2.15kgs | 2.2kgs | 2.25kgs |
Max. Number of Tying Knots | 1200ties (one Ni-MH battery) | 1200ties (one Ni-MH battery) | 1200ties (one Ni-MH battery) |
Wire Type | galvanized steel wire, Annealed steel wire | galvanized steel wire, Annealed steel wire | galvanized steel wire, Annealed steel wire |
Wire | 0.8mm | 0.8mm | 0.8mm |
Turns per Tie | 2 turns/3turns | 2 turns/3turns | 3turns/4turns |
Ties per Coil | Approx. 260ties(2turns) | Approx.160ties(2turns) | Approx. 100 ties(3 turns) |
Ties per Charge | 4-5 Coils | 6-7 Coils | 7-8 Coils |
No comments:
Post a Comment